Breath alcohol analyzer. Alcottest w/ alcaline batery

1 289,25 €

AIA24

Quick and long-term stable short waiting time until first test, quick determination of the measured value, quick retest rate and small  standard deviation.

Customer ratings and reviews

Nobody has posted a review yet


• Quick and long-term stable short waiting time until first test, quick determination of the measured value, quick retest rate and small  standard deviation.
• Low blowing resistance.
• Real-time clock with date and time.
• Measurements are also possible without cooperation of the person being tested by passive sampling: triggered by pressing a button and afterwards qualitative detection of alcohol.
• Data memory for more than 9,700 measurement results with date and time information: the stored data may be recalled menu-driven by using a button on the instrument.
• Statistical options.
• Protocol print-out by the Alcotest Printer.
• Three different power supply units: with alkaline batteries (up to 600 measurements),with rechargeable accumulator (up to 300 measurements) or motor vehicle connection 12 V.
• Charging station with indication of charging condition and overcharging.
protection for accumulator power supply unit.

Measuring principle: Electrochemical sensor.
Measuring units: mg/L, ‰, % (further measuring units available).
Measurement range: 0.00 to 1.50 mg/L; 0.00 to 3.00 ‰; 0.000 to 0.300 %.
Display range: 0.00 to 9.99 mg/L; 0.00 to 9.99 ‰; 0.000 to 0.999 %.
Ambient conditions:
  • For operation: – 5 to 45°C /23 to 113°F (and at – 20°C/– 4°F but not for more than 30 min and only after being kept above 0°C/32°F   • •     until use).
  • For storage: – 40 to 65°C/– 40 to 149°F
Sampling:
  • Blowing time: 4 to 12 s (depends on the intensity).
  • Breath flow: > 6 L/min.
  • Breath volume: >1.2 L (adjustable).
Measurement accuracy (max. error of repeatability with an ethanol standard):
  • 0 to 0.5 mg/L: ± 0.03 mg/L
  • 0 to 1.0 ‰: ± 0.05‰
  • > 0.5 mg/L: ± 5 % of measured value
  • >1.0 ‰:
Sensitivity drift : typically 0.6 % of measured value/month.
Intervals before: 1st measurement approx. 15 s.
  • readiness for operation: after determining a previous test result in range: up to 0.19 mg/L: 10 s > 0.95 mg/L: 90 s
Calibration interval: recommended 6 months (depends on required accuracy)
Dimensions: 70 mm x 230 mm x 34 mm (W x H x D)
Weight approx: 500 g

Related Products